My Account
Subcategories
Subcategories
-
ID Card Printing
ID Card Printers
-
Barcode Products
Barcode Products
-
Computers
Computers
-
Networking
Networking
-
Accessories
Accessories
-
Focusrite Clarett+ OctoPre Eight-Channel Preamp with$880.00
Key Features
Adds 8 Mic Pres to Existing Interfaces
Adds 8 Line Outs to Existing Interfaces
Classic Focusrite Analog Air (ISA 110)
24-Bit / 192 kHz AD/DA
Dual-Port ADAT I/O for 8 Channels
Switchable Insert Point on Every Channel
48V Power on All Inputs + Word Clock I/O
118 dB of Dynamic range + 129 dBu EIN
Two Hi-Z Instrument Inputs
Outputs Fed from D/A or Mic Pres
Designed to provide an additional eight mic pres, eight line outputs, and 24-bit / 192 kHz AD/DA conversion, the Focusrite Clarett+ OctoPre connects with your existing interface via ADAT connections. Building upon the success of the original OctoPre, the Clarett+ OctoPre features improved high-dynamic-range A/D and D/A conversion with
-
Focusrite Vocaster DM14v Dynamic Cardioid XLR Podcasting Microphone$142.98
Podcasters, Streamers, Gamers, Creators
End-Address, Tuned for Rich Voice Tone
Dynamic Capsule, Cardioid Pickup Pattern
Built-In Windshield Controls Plosives
Rumble-Free with Built-In Shockmount
Yoke Mount for Optimal Positioning
Balanced XLR Output, XLR Cable Included
5/8"-27 MountingThread, 3/8"-16 Adapter
Show Less
-
Focusrite ISA Two Rackmount 2-Channel Microphone Preamp$1,100.00
Key Features
Dual Mono
Transformer Based Microphone Inputs
Variable Input Impedance
Front Panel Instrument Inputs
Rear Panel Line Inputs
Per Channel Insert Points
Per Channel High-Pass Filters
Phantom Power
Phase Reverse Switches
User-Calibrated Meter
The ISA Two from Focusrite is a dual mono microphone preamp featuring transformer based microphone inputs with variable input impedance. Based on the legendary designs found in the Focusrite Forte and Studio consoles, the preamps provides up to 80 dB of gain, while two front panel instrument inputs allow for immediate access to
-
-
Ithaca 8040-USB-DG-ITH Barcode Label Printer$450.00
Ithaca 8040 - Direct thermal linerless label printer, USB, auto-cutter, Ithaca emulation. Color: Dark gray. Includes: power supply & cord, cable purchased separately.
-
Ithaca 8040-S9-DG-ITH Barcode Label Printer$520.00
Ithaca 8040 - Direct thermal linerless label printer, 9 pin parallel, auto-cutter, Ithaca emulation. Color: Dark gray. Includes: power supply & cord, cable purchased separately
-
Ithaca 8040-ETH-DG-ITH Barcode Label Printer$520.00
Ithaca 8040 - Direct thermal linerless label printer, Ethernet, auto-cutter, Ithaca emulation. Color: Dark gray. Includes: power supply & cord, cable purchased separately
-
Honeywell MK5602-69B614 Mobile Handheld Computer$600.00
Metrologic SP5600 OptimusR Batch - OptimusR - Laser Batch unit w Standard ith 2MB, Cradle, RS-232 Cable
-
BRADY PEOPLE ID Clear Vinyl Vertical Badge Holder$32.98
Keep your ID cards protected and accessible with this 100-pack of Clear Vinyl Vertical Badge Holders with Slot and Chain Holes from Brady People ID. Each holder has insert dimensions of 2.3 x 3.38" to hold one CR-80 card. The holders feature reinforced edges and a 20-mil-thick front for longevity along with a thumb notch and both slot and
-
BRADY PEOPLE ID Clear Vinyl Vertical Badge Holder with Resealable Top$42.90
Holds One CR-80 Card
Vertical, Top-Loading
20-mil-Thick Front & Back Vinyl
Weather Resistant
-
BRADY PEOPLE ID Premium Vertical Top-Load 2-Card Badge Holder$51.15
50-Pack
Each Holds 2 Credit-Card Sized Cards
Rigid Plastic Material Prevents Bending
Frosty Finish with UV Protection
Thumb Notches for Easy Card Access
-
BRADY PEOPLE ID Badge Reel with Clear Vinyl Strap$27.44
For Slotted Cards and Holders
Clear Vinyl Strap
34" Retractable Cord
Reel Diameter: 1-1/4"
Label Size: 3/4"
Slide Belt Clip
-
BRADY PEOPLE ID Round Badge Reel with Clear Vinyl$21.94
For Slotted Cards and Holders
Clear Vinyl Strap
Reel Diameter: 1-1/4"
Label Size: 3/4"
Swivel Spring Clip
-
BRADY PEOPLE ID Premium Badge Reel with Strap$29.63
For Slotted Cards and Holders
Twist-Free Design
Clear Vinyl Strap
34" Retractable Cord
Reel Diameter: 1-1/4"
Label Size: 1"
Slide Belt Clip
-
BRADY PEOPLE ID Badge Reel with Clear Vinyl Strap$27.44
For Slotted Cards and Holders
Clear Vinyl Strap
34" Retractable Cord
Reel Diameter: 1-1/4"
Label Size: 3/4"
Slide Belt Clip
-
BRADY PEOPLE ID 3/8" Breakaway Lanyard$38.50
For Cards and Card Holders
Flat Braid Woven Polypropylene Material
Length: 36"
Breakaway Design
Universal Slide Adapter
Nickel-Plated Steel Swivel Hook
-
BRADY PEOPLE ID 3/8" Breakaway Lanyard$48.80
For Cards and Card Holders
Flat Braid Woven Polypropylene Material
Length: 36"
Breakaway Design
Wide Plastic Hook Prevents Rotation
BRADY PEOPLE ID 3/8" Breakaway Lanyard with Wide Plastic Hook (Black, 100-Pack)
-
Focusrite Scarlett Solo Audio Interface - 3rd Generation$142.00
Usage: PodCasting; Streaming; Content Creation
Device Type: Audio Interface
Interface: USB
Input Connectors: 1x XLR
What's in the Box: Interface, USB Cable
-
Focusrite Scarlett Studio Solo (3rd Gen) USB Audio Interface KitAMS-SCARLETT-SO$252.89
Device Type: Audio Interface
Interface: USB
Input Connectors: 1x XLR, 1x 1/4"
Parts: 3 Years
Labor: 3 Years
-
Brady 2110-1100 Clip$52.00
Brady Strap - Strap Clip, Clear, 2-3/4" (70mm), Mylar Strap, 2-Hole Clip. Quantity: 100. MOQ: 200
-
-
Brady 2105-2004 Clip$56.00
Brady Strap - Green Vinyl Strap Clip with 2-Hole Nps Clip, 2-3/4" (70mm). Quantity of 100.
The sturdy design Badge Holder gives protection to your gadget
High-quality Steel material for long-term usage
